Tutorial - Mushrooms
by Roman aka jar
posted by roman, jarhead, kong
Aloa base builders, base constructors and base lovers!
This is another article that will drop in the massive article section of Massive Voodoo.
It is about mushrooms again and it might be a good idea to combine it with the tree funghi tutorial, when you are creating your magic forest base.
I planned a base for Kabuki's Alice in Wonderland.
The model itself already sits on a big mushroom that is delivered with the kit.
For my personal taste, if there is already one, there should be way more.
I started to build up the base and placed the resin mushroom. Then I prepared some Magic Sculp to sculpt some mushroom parts.
I did different ones. In fact the "sculpting" of these pieces is not too hard. I did different ones. One after the other and placed them on a piece of cork to collect them. I did not care much about my fingerprints or dirt somewhere in the material as in the end the mushrooms need a very natural structure.
I mainly did the typicall mushroom pieces. A trunk and a hat to be glued together after they dried.
I also did some morels. A thin trunk and a hat I prepared with the toothpick.
I did some smaller ones, with smaller hats to put in as detail later on. I always enjoy bases with material in different weight. If you got something very heavy there can be something tiny and fragile to bring back balance in the composition.
I did those small mushroom hats very easy. Just use small balls of Putty, press them down with your fingers and use a toothpick to press a small crater in it.
While everything dried I added some roots and smaller stones to the base:
After all was dry I started to place them at the base with superglue. Took some time but you can play quite nice with the composition of the pieces. I also added soil to the base when every mushroom was placed.
I was pretty happy with the result, but I have to say bases always start to look good when you prime them and different material becomes one for the viewer's eyes.
As you might have seen there are also some very small ones. You can create them in every size you want to, just take your time. Here is an example where I have done very, very small ones on the base of the "Queen of the Undead" ... click to enlarge to really see them :)
So far, I hope you enjoyed this article!
Happy mushroom time to you!
Keep on happy painting!
Best Wishes
Roman
Aloa base builders, base constructors and base lovers!
This is another article that will drop in the massive article section of Massive Voodoo.
It is about mushrooms again and it might be a good idea to combine it with the tree funghi tutorial, when you are creating your magic forest base.
I planned a base for Kabuki's Alice in Wonderland.
The model itself already sits on a big mushroom that is delivered with the kit.
For my personal taste, if there is already one, there should be way more.
I started to build up the base and placed the resin mushroom. Then I prepared some Magic Sculp to sculpt some mushroom parts.
I did different ones. In fact the "sculpting" of these pieces is not too hard. I did different ones. One after the other and placed them on a piece of cork to collect them. I did not care much about my fingerprints or dirt somewhere in the material as in the end the mushrooms need a very natural structure.
I mainly did the typicall mushroom pieces. A trunk and a hat to be glued together after they dried.
I also did some morels. A thin trunk and a hat I prepared with the toothpick.
I did some smaller ones, with smaller hats to put in as detail later on. I always enjoy bases with material in different weight. If you got something very heavy there can be something tiny and fragile to bring back balance in the composition.
I did those small mushroom hats very easy. Just use small balls of Putty, press them down with your fingers and use a toothpick to press a small crater in it.
While everything dried I added some roots and smaller stones to the base:
After all was dry I started to place them at the base with superglue. Took some time but you can play quite nice with the composition of the pieces. I also added soil to the base when every mushroom was placed.
I was pretty happy with the result, but I have to say bases always start to look good when you prime them and different material becomes one for the viewer's eyes.
As you might have seen there are also some very small ones. You can create them in every size you want to, just take your time. Here is an example where I have done very, very small ones on the base of the "Queen of the Undead" ... click to enlarge to really see them :)
So far, I hope you enjoyed this article!
Happy mushroom time to you!
Keep on happy painting!
Best Wishes
Roman
Great! You told me in the workshop, you would show me how to make mushrooms for my forest base. But we both forgot about that.
If I have a house one day, I'll make sure to have an extra mush-room... *irkirkirk*
@Mosch
http://massivevoodoo.blogspot.de/2013/04/tutorial-mushrooms.html
I never forget :)
Another great tutorial - thank you for sharing it.
Tony
Great tutorial!
Thank you
patttttry
awesome tute!
Fantastic tutorial, though I was wondering. When applying natural items such as soil and wood, do you have to preserve them at all; with a special coating? Or can you just paint on the soil once it is dried and primed?
Wow, when I saw that allice sitting on the mushroom I just exclaimed "Oh, NIIICE!".
You made me talk to myself :D
Thanks for this tutorial.
Alice from Kabuki waiting for me in the queue to be painted.
Overall, I thank you for all your tutorials for the preparation of bases! Over the last year has allowed me to work hard to develop my skills.
ARBAL